Digital Television Version 2.1.004

This application expects that the Hauppauge Wincast/TV drivers
are installed on your system. If you have not installed the
Wincast/TV drivers please do so before installing this application.

INSTALLATION

The installation of this product is done with the OS/2 MultiMedia
Installation Utility MINSTALL.EXE. Run the installation utility
and select the directory where you have unzipped the application
files.

There are two products available for installation in this distribution:

Digital TV Media Device - this is the Media Control Device and
a Vendor Specific Driver for the Hauppauge Wincast/TV drivers.

Digital TV Applications - this is the Television Application YADTV
that is tailored to take advantage of the capabilities of the
Digital TV Media Device.

FEATURES

The Digital TV Media Device will use either the GRADD direct draw
capabilities of the Hauppauge Wincast/TV drivers or, if you are
not using a GRADD video driver, will use DIVE for the display of
the video image on the screen. The use of GRADD or DIVE is done
automatically by the Digital TV Media Device.

The program now supports the use of the OS2ENDIVE video acceleration
drivers when in DIVE mode. Please refer to the OS2ENDIVE documentation
for how to install the OS2ENDIVE drivers.

MINSTALL problems

There may be a problem with the MINSTALL program crashing with
an error in PMMERGE.DLL. We have found that if you move the selection
screen displayed by MINSTALL partly off the desktop the installation
will continue normally without an error. This appears to be a bug
in some versions of MINSTALL.

HISTORY of CHANGES

Release 2.1.004

- Remember window position at shut down of application
- Remember TV picture location when TV is turned off
- bug fix in MCD code for window location return

Release 2.1.003

- changed the VSD code so the DIVE processing thread is time critical

Release 2.1.002

- display error messages in a field on the main YADTV/2 window

Release 2.1.001

- put back offset corrections for image positioning required for VCAFILT
- application now mutes the TV before changing channels

Release 2.1.000

- The layout of the YADTV/2 application has been changed to a new layout
- The MCD and VSD code has been changed to support the OS2ENDIVE driver
- When in DIVE mode the TV image to frame alignment has been fixed

Release 1.0.006

- Provide Clipping support for WCAST driver 1.041V and above
- minor bug fixes

Release 1.0.005

- Corrected problems in YADTV/2

Release 1.0.004

- Corrected a problem in YADTV/2
- Changed timing for wait to allow DIVE thread to start
- Increased stack allocation for MCD Monitor thread
- Increased stack allocation for VSD DIVE thread
- Changed MCD monitor so all cliplist processing done in line

Release 1.0.003

- Corrected a problem in the installation files.
- added the yadtv2.txt information file to the installation.
- added icons for the "readme" and "yadtv2.txt" to the
  program folder.
- added URL icon for the Wincast/TV drivers to the program folder.

Release 1.0.002

- Corrected a problem with the rapid open/close of the device
  when DIVE display was active.

Release 1.0.001

- Layout of Monitor Window changed to have a wider border. 
- Video Display Image on Monitor Window limited to the maximum
  X and Y extents of the digitized video image.
- Corrected a problem that would allow the TV image to be displayed
  outside of the Monitor window when the window was moved off the
  screen to the left.
- Corrected an error that caused a gratuitous error return when
  the "put destination at x y cx cy move size" command was
  processed.
- Corrected an error that did not invalidate the prior display
  region when the "put destination" command was processed and
  the default MCD monitor window was in use.

Release 1.0.000 - First Release